Leaving tonight at midnight from Skyway. This is a test post to see how my phone works with the service. http://www.jesterscourt.net/phpBB3/viewtopic.php?f=18&t=42

Here is the grid layout with correct proportions.  Click on the image to embiggen, and actually see the whole thing.   The two black bars at the top are the doors into the arena, the black bars on the sides toward the bottom are the emergency exit doors.

The arena weighs in at 2,632.5 sq feet.

The observation deck is just above the red energizers, it is 40 feet long.

View from the observation deck:

This is the back of the wall we built, I added 4x4 support beams.  

  We are nearing the end.  The wall is now fully supported, the j-hooks for the grid are almost all in place, would have been last night but I ran out of washers.  The grid takes some time to string and tighten, but after that, we can design and build our first arena!
  Sure I've got some more work before we can actually play in the arena, but the tough stuff is almost done.  Brian said he would work on the black lights and wiring next week, Gumby said he would work on the sound system.  I do still have to work on the pod housings, but wiring the system isn't hard.
  Nationals at our place looks like it might actually happen!

  I don't have any pictures right now, but we have the painting done.  My sister finished the entire ceiling.  I have about half of the grid up, the other half which is attached to the wall I built is going to take some more work.  The wall is buckling under the pressure.  It's mostly at the joint where I knew I would have problems.  It looks like I will have to re-enforce the main supports to a truss in the ceiling.  I think I will also have to build the observation deck first to give the wall extra strength.
  The worst part about all that?  More money.

  We had a tournament at Skate Zone over the weekend, here are the results: http://www.jesterscourt.net/phpBB3/viewtopic.php?f=7&t=11

Last Thursday 2 car loads of Pittsburgh players came down to help!  They managed to get the rest of the walls painted and cleared out the entire room of all the things that were in the way.  We got some more uni-strut up, and I have the proper size of bolts to anchor them.

We are getting close...

A huge thanks to all the people that came out to help with the arena!  Samantha came nice and early to get a good start, Mark helped her paint the walls.  Jess helped with the painting when she arrived, Jay helped Kel and I with the grid while Justin worked on the equipment.  Brian was there all day as well helping with the paint.

In this picture you can see the Uni-Strut that the grid will be attached to.  We placed two 2x4 backing on it to prevent any bowing.  All the support is coming from the poles.  The wood looks pretty bad, but that's what you get for using old pieces saved from a little room we took down.  They don't look good, but the grid will be straight.

You can see here where the thick strut meets the thin strut which was used on the wall we built because we didn't have to worry about long spans with no support.  All of the strut is hung with relatively small bolts, we have to get the proper size and go back through, but that won'e be nearly as hard.

Here you can see the paint job done.  Parts of the ceiling were done with the sprayer before it broke.  The rest was all done by hand.

Here we have Justin setting up his area to work on the equipment.

We accomplished a lot, still so much more to go.  We have about half the painting done, and half the uni-strut.  

Plywood face complete!


Plywood face complete! With Kel's help last night we finished the last of the plywood face, used some thin panels to cover the viewing deck to keep the heat in, and fired up the furnace. We just happened to have the right size door laying around so we installed that as well.
Since Brian nailed the wall to the concrete the other day, we are mostly finished with this part of the project. Tonight will involve finishing the details, like putting up corner boards, a trimmed 2x4 where the grid will hang on the new wall, maybe a 2x6 ledge for the viewing deck, cleaning the small stuff out of the way and cleaning the walls so we can paint. If people show up tonight we might actually make it to the painting.
Once the paint is done, the grid is next.